1. Plot Plan

2. Grading and Drainage

3. Landscaping Plan

4. Architectural

a) Floor and Roof Plans

b) Exterior Elevations

5. Structural

a) Foundation Plan

b) Floor Plan

c) Truss Information

d) Cross Section

e) Structural Framing Details

6. HVAC, Electrical, and Plumbing Plans

B. Calculations

1. Structural Calculations

2. Title 24 Energy Calculations and Forms

C. Other Documents (**)

1. Soils Report

2. Hazardous Material Declaration

3. Bay Area Air Quality Notification (BAAQMD Air Permit)

4. Inspection Report Per UBC-1997, Section 1702

II. Document Format Information

A. Plot Plan

1. Lot Dimension

2. Building Footprint with all Projections & Dimensions to

all Property Lines

3. Visible Utilities to Curb

4. Parking Layout and Driveways

B. Grading and Drainage Plans

1. Tops and Toes of Slopes

2. Pad Elev. And Ground Slope Drainage Scheme and Topo

3. Retaining Walls and Drainage Systems

C. Landscaping Plan

1. Irrigation and Planting Schedule

2. Accessory Structures, Walkways, Decks, etc.

D. Architectural and Structural Plans

1. Foundation Plan

2. Floor and Roof Framing Plans

3. Architectural Plans

4. Exterior Elevations

5. Structural Material Specifications

6. Structural and Architectural Details (Item H)

7. Truss Configuration and Location (Item J)

8. Typical Cross Section in Each Direction

9. Calculations and Details for Racks over 8 feet

E. HVAC, Plumbing and Electrical Plan

1. Plumbing Fixtures and Single Line Schematic with Pipe

Size Calculations (**)

2. Location of HVAC Equipment, Duct Location, and Layout

and Fire Dampers

3. Outlets, Fixtures, Switches, Service Panels, with Size

and Ground, and Subpanels, Load

4. Sprinkler Plan and Hydraulic Calculations Submitted for

Sprinklered Building (Prior to Installation)

F. Title 24 - Energy

1. Form CF-1 on drawing with all Required Signatures

2. Backup Forms Including Heat Loss Calculations

3. List Relevant Mandatory Features, or Print MF-1 on Drawings

G. Information

1. Wet Sign on all Document by Document Maker

2. Name, Title, Registration (Address and Phone) of Design
Professional

3. Address of Property and Name, Address and Phone of the
Property Owner

4. Cover Sheet Information

a) Applicable Codes and Editions

b) Description and Type of Work

c) Occupancy and Type of Construction

d) Gross Area, by Floor and Building Height

e) Index of Drawing

(#) H. Structural and Architectural Details

1. Window, Head Jamb, and Sill

2. Exterior Door: Head, Jamb and Sill

3. Flashing: Vertical Junctures of Materials

4. Footings, Piers, and Grade Beams

5. Post and Girder Intersections

6. Roof: Eaves, Overhangs, Rake and Gables

7. Floor Changes (i.e. Slab to Wood Frame)

8. Handrails, Guardrails, and Support Details

9. Structural Section with Detail from Foundation to Roof

10. Details of all Fire Rated Assemblies

11. Section of Fire Rated Corridor

12. Scale for all Drawings

(#) J. Prefab Trusses (Provide Item 1 or 2)

1. Submit the Following with Permit Package (**):

a) Roof Framing Plan with Truss ID No.

b) Detail of all Truss Splices, Connections and Plate Sizes

c) Show all Trusses, Gable Bracing and Bridge

d) Review by Individual Responsible for Design

2. Provide Single Line Truss Diagram with all Vertical and

Lateral Load Including Bearing Points Shown with Reference

To Framing Plan

(**) As per the requirements of local jurisdiction.

(#) This is not a complete list of all required submittals