1. Plot Plan

2. Grading Plan

3. Architectural Plan (*)

a) Floor Plan

b) Roof Plan

c) Exterior Elevations

4. Structural

a) Foundation Plan

b) Floor Framing Plan

c) Roof Framing Plan

d) Truss Information

e) Cross Section

f) Structural Framing Details

5. HVAC Plan (*)

6. Electrical Plan (*)

B. Calculations

1. Structural Calculations

2. Energy Calculations and Forms (Title 24)

C. Other Documents

1. Soils Report (Verify with Jurisdiction)

II. Information to be included on Documents

A. Plot Plan

1. Lot Dimension

2. Building Footprint with all Projections and Dimensions to Property
Lines

3. North Arrow

4. Visible Utility to Curb

5. Easement(s)

B. Grading and Drainage

1. Tops and Toes of Slopes

2. Pad Elevations Ground Slope Drainage Scheme and Top (Hill Sites)

3. Retaining Walls and Drainage Systems

C. Architectural and Structural Plans

1. Foundation and Structural Floor Framing Plans

2. Architectural Floor Plan(s)

3. Exterior Elevations

4. Structural Material Specification

5. Structural and Architectural Details (See G)

6. Truss Configurations and Locations (See H)

7. Typical Cross Section in each Direction

D. HVAC, Plumbing and Electrical Plans

1. Location of HVAC Equipment and Plumbing Fixtures

2. Duct Location and Layout for Underfloor

3. Outlets, Fixtures, Switches, Smoke Detectors, Service Panels with
Size and Ground, Subpanels

E. Energy Requirements

1. Form CF-1 with All Required Signatures

2. Backup Forms Including heat Loss Calculations

3. Print CF-1R Drawings

4. List Relevant Mandatory Features, or complete Print MF-1R on
Drawings

F. Information (**)

1. Wet Sign on All Documents by Document Maker

2. Name, Title, Registration (Address and Phone Number) of Design
Professional

3. Address of Property and name, Address and Phone Number of the
Property Owner

4. Cover Sheet Information

a) Applicable Codes and Additions

b) Description and Type of Work

c) Occupancy and Type of Construction

d) Gross Area, by Floor(s) and Building Heights.

e) Index of Drawings

5. Scale for all Drawings

G. Details (#)

1. Window: Head, Jamb and Sill

2. Exterior Doors: Head, Jamb and Sill

3. Flashing: Vertical Junctures of Materials

4. Fireplace - Masonry

5. Footing, Piers and Grade Beams

6. Post and Girder Intersections

7. Roof: Eaves, Overhangs, Rakes and Gables

8. Cabinet Elevations

9. Floor Changes (i.e. Wood to Concrete)

10. Handrail(s) and Guardrail(s) with Support

11. Structural Wall Sections with Details at Foundation, Floor and Roof
Levels

H. Prefab. Trusses Provide Items 1 or 2 (#)

1. Submit Following (**):

a) Roof Framing Plan with Truss I.D. No. and Manufacturer’s Name

b) Detail of all Truss Splices, Connections and Plates Sizes

c) Show all Trusses Including Gable Bracing and Bridge

d) Review by Individual Responsible for Design

2. Provide Single Line Truss Diagram with all Vertical and Lateral Loads
Including Bearing Points Shown with Reference of Framing Plan

(*) Plans can be combined for simple buildings, if clarity is maintained.

(**) As per the requirements of local jurisdiction.

(#) This is not a complete list of all required submittals.